- Self-adhesive tape (whether low-tac or otherwise), used while adding site protection to door faces and edges during installation; must not come into direct contact with the actual face or edge of the door.
- This has the potential to cause damage and so the doors would not be covered under our normal guarantee should this have occurred.
- The weight of fire doors and other solid core doors is heavier than would normally be handled by one person.
- Doors should normally be handled by at least 2 people.
- Doors should always be stacked on a flat and level surface in a well-ventilated room.
- The stack height should be limited to ensure safe handling is possible.
- Never store a door on its edge or end.
- Use at least three load bearers to allow equal weight distribution. Ensure that the bearers are wider than the door.
- Always stack the widest doors at the bottom.
- Do not allow direct sunlight on the doors, as this may cause fading.
- The door must not be stored or fitted in a building with wet trades. For example, plastering should have been finished and given time to completely dry.
- Doors and frames must be stored in dry conditions and free from excessive moisture levels.
- If stacking doors, store them in the sequence you are using them to prevent unnecessary movement.
- Products manufactured from timber-related materials. along with the packaging, are combustible, therefore the product should be stored away from radiant heat or fire.
- In case of fire, use water to extinguish. When using timber products splinters may occur.
- Care should always be taken and where appropriate protective gloves should be worn.
- The disposal of waste polythene or other packaging materials should be through the normal trade recycling or refuse collection outlets.
- When handling timber products, normal hygiene standards should be used before food and drink are consumed.
Description
General Information:
| Brand | Rocket Door Frames |
| Model Code | ULTRA-FLUSH |
Door Information:
| Type | Internal Doors |
| Colour | Customised |
| Finish | Primed |
| Construction | Solid Core |
| Opening Options | Left or Right, Push or Pull |
| Frame Material | Aluminium |
| Thickness | Minimum stud 63mm |
| Supplied Components |
|
| Available Sizes (inch.) | Sizes 78" x 24", 27", 30", 33", 2040mm x 726mm, 826mm, 926mm supplied |
| Recommended Hardware | Door hardware included (Handles supplied for extra charges) |
| Guarantee | 10 years |
Additional Information:
| Priming | Ultra-smooth, no sanding or priming required |
| Certified Standards |
EN ISO 2409/DIN 53151 – grade 0-1 FD30 |
| Returns Policy |
Non-returnable unless manufacturing defects noted within 48 hours of delivery. |
CARE & HANDLING
RETURNS
- When the goods are delivered you have 48 hours to notify us of any discrepancies, no claims will be accepted after this time.
- Due to the bespoke nature of these doors, these are a special item manufactured to order and therefore the doors are non-returnable unless due to manufacturing defects notified to us within 48 hours of delivery.